Industry Directory | Manufacturer
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
Industry Directory | Manufacturer
Modular pick and place automation - tape and reel - tube feeder - coplanarity check - assembly machine - contactless pick and place
Proven Peel Back Force Measurement Supplying consistent SMT carrier packaging is critical for customers using SMT pick-and-place machines. Nothing will stop a production line faster than carrier cover tape that doesn’t peel back properly. The proble
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Electronics Forum | Sat Nov 10 08:21:42 EST 2007 | cyber_wolf
I was asking if anyone had any personal preference on a particular machine.
Electronics Forum | Thu Nov 08 14:24:17 EST 2007 | cyber_wolf
We are looking onto a taping machine. High mix high change over. Does anyone out there aside from the sales reps have any preference ? Good/bad/indifferent ?
Used SMT Equipment | SMD Placement Machines
* DOS * Flying Nozzle change * Fiducial camera * Pneumatic tape feeder * Locate Pin * Edge clamp * Z servo push plate * Entrance sub stop * Exit sub stop * Auto width adjust * Feeder float detection
Used SMT Equipment | Soldering - Reflow
1997 Electrovert OMNI 7 Reflow Oven Left to Right 7 Heating Zones (Top & Bottom Heaters) Edge & Mesh Transport Power: 480 VAC; 101.2A; 60Hz; 3 Phase Machine Dimensions: 194" x 54" x 56" Serial: 11871242
Industry News | 2019-01-09 21:58:38.0
GPD Global will exhibit at IPC APEX EXPO 2019. Stop by Booth 2915 to see live demonstrations of machines and equipment. Experts will be there to discuss your production needs. Whether your project requires a pump for retrofitting or a fully automated dispense system, conformal coating, or component preparation, we have a solution for you.
Industry News | 2017-07-10 17:31:47.0
GPD Global is in the process of setting up a demonstration center on the East coast of the United States. Rapid Coatings, located in Woburn Massachusetts, will be the East coast demo coating center. A GPD Global conformal coating system (SimpleCoat) configured with spray, precision dispense, and volumetric progressive cavity displacement technology will be used for Rapid Coatings production and customer demonstration.
Parts & Supplies | Pick and Place/Feeders
FUJI NXT H04 7.0 Nozzle Model: FUJI NXT H04 7.0 Nozzle FUJI Nozzle List Brand Machine Model Specification Material of nozzle tip FUJI CP3 / CP4 Bore diameter 0.7 / 1.0 / 1.3 Tungsten steel FUJI CP6 / CP7 Bore diameter 0.7 / 1.0 / 1.3 / 1.8 Tungs
Parts & Supplies | Pick and Place/Feeders
FUJI NXT H01 7.0 Nozzle Model: FUJI NXT H01 7.0 Nozzle FUJI Nozzles Series Brand Machine Model Specification Material of nozzle tip FUJI CP3 / CP4 Bore diameter 0.7 / 1.0 / 1.3 Tungsten steel FUJI CP6 / CP7 Bore diameter 0.7 / 1.0 / 1.3 / 1.8 Tu
Technical Library | 2021-12-31 06:09:47.0
The packaging method of surface mount components has become an important part of the SMT system. It directly affects the efficiency of assembly production and must be optimized in combination with the type and number of feeders of the SMT machine. There are four main types of packaging for surface mount components, Tape, tube, tray and bulk.
Technical Library | 2015-05-28 17:34:48.0
The printed circuit board assembly industry has long embraced the "Smaller, Lighter, Faster" mantra for electronic devices, especially in our ubiquitous mobile devices. As manufacturers increase smart phone functionality and capability, designers must adopt smaller components to facilitate high-density packaging. Measuring over 40% smaller than today's 0402M (0.4mmx0.2mm) microchip, the new 03015M (0.3mm×0.15mm) microchip epitomizes the bleeding-edge of surface mount component miniaturization. This presentation will explore board and component trends, and then delve into three critical areas for successful 03015M adoption: placement equipment, assembly materials, and process controls. Beyond machine requirements, the importance of taping specifications, component shape, solder fillet, spacing gap, and stencil design are explored. We will also examine how Adaptive Process Control can increase production yields and reduce defects by placing components to solder position rather than pad. Understanding the process considerations for 03015M component mounting today will help designers and manufacturers transition to successful placement tomorrow.
Proven Peel Back Force Measurement Supplying consistent SMT carrier packaging is critical for customers using SMT pick-and-place machines. Nothing will stop a production line faster than carrier cover tape that doesn’t peel back properly. The proble
Eliminate Body Stress with Versatile CF-8 GPD's CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. Capabilities Meets exacting military s
Events Calendar | Wed Jun 21 00:00:00 EDT 2017 - Sat Jun 24 00:00:00 EDT 2017 | Bangkok, Thailand
Assembly Technology Expo
Career Center | , India | Maintenance
Have worked in ELECTRONICS MANUFACTURING & SEMICONDUCTOR industry for 8+ years for machine maintenance worked with TDK CORPORATION (EPCOS PTE LTD) IN SINGAPORE FOR SEMICONDUCTOR worked with NOKIA INDIA PVT LTD IN INDIA FOR SMT MACHINE MAINTENANCE
Career Center | , | Engineering,Maintenance,Technical Support
Dear Sir/Madam, I am having the 10 years exprience in SMT field. Currently I am working in Service industry as Senior Engineer. Specially I am exprience and trained in FUJI and Speedline machines. Earlier I worked with Manufacturing Industry.
Qinyi Electronics Co.,Ltd | https://www.qy-smt.com/shop/aa8ma09-nozzle-7-0-181495?page=862&order=name+asc
FUJI Nozzle 7.0 AA8MA09 | QYSMT × Home about Us ABOUT US FAQ SMT spare parts SMT surplus equipment SMT peripheral equipments News Contact US 0 0 Sign in contact us Products Nozzle
ASCEN Technology | https://www.ascen.ltd/Products/Component_lead_forming_machine/564.html
axial component De-Taping Machine-PCB magazine loader,PCB turn conveyor,pcb conformal coating machine,PCB router,PCB depaneling machine,pcb buffer conveyor from ASCEN technology Welcome to visit ASCEN | | | | | | | Cart
